Brand Service Spring Forming Machine Diameter 0.1 mm to 0.8 mm
| Modle | JD-208A Spring Forming Machine |
| Wire Diameter | 0.1mm-0.8mm |
| MAX Outer Diameter | 20mm |
| Max. Production Speed | 550pcs/min |
| Wire Feed Length | Unlimited |
| Send The Spool(Y) | 0.75kw |
| The Camshaft(X) | 0.75kw |
| Monitor Display | Color/Chinese/English |
| The Machine Size | 80*65*145cm |
| Machine Weights | 500kg |
| Power | 220V 3P 50/60Hz |
| Packing | Wooden case |
Features of Spring Forming Machine
1. Wire feeding: Has four sets of feeding structure, increase the
stroke, so that it can product the spring those diameter up to
4.2mm, to adapt to a wider range.
2. Servo Motor: this part is refinedly made of aluminum alloy, max
speed is up to 3000 degrees per second (360 degrees in a circle as
calculated) thus the rotation angle of the spindle less work
without affecting the spindle speed. In addition to the core switch
can be rotated so that space to complete some complex shapes, it
can also be used to control the pitch of the spring, so the pitch
can be done to simplify the transfer of digital control machine
processes, thus reducing setup times.
3. Servo motors Angular: Angular is a digital servo means to
achieve freedom CORNER purposes. Computer-controlled bending angle
can be changed at any time, without the need to adjust the
mechanical parts, thereby reducing setup times, this bending
system, the maximum speed within 0.017 seconds of the wire into
90-degree corners, and folded into 180 degrees only need 0.034
seconds! Also knuckle device can swing 25 degrees, convenient
knuckle at certain angles inside.
.
Spring Sample
Company Introduction
Our products have been sold in China and all over the world, such
as Korea, Turkey, Iran, Vietnam and have received a lot of praise.
Jinding owns independent research, development, design ability and
accept making product according to customers' requirements. Our
company has always aimed to manufacture "high speed, accurate, cost
effective" equipment. Jinding people are in line with "quality
first, customer oriented, excellent service" idea .
FAQ
1. When sending an inquiry, what information should I provide?
A: spring specification such as wire diameter, OD., ID, number of
coils and so on. If you have spring drawing or sample photo will be
better. Then after evaluating, I'll suggest the machines and
production speed to you.
2. What's the payment term?
A: After you send the purchase order and pay 30% deposit, then we
will start prepare machines. After about 14 days, machine is
prepared, you have to pay the full payment then we will deliver the
machines to our harbor.
3. How long does it take for my order to be delivered?
A: Normally a month after recieved the payment.
